
Pressure Sand & Activated Carbon Filters
FRP and MS pressure filters with graded sand or activated carbon media — the workhorse pre-treatment stage in almost every treatment train we build.
Overview
Nearly every plant, whether it ends in softening, ultrafiltration or reverse osmosis, starts here. Pressure sand filters strip suspended solids and turbidity down to below 5 ppm, while activated carbon beds take out free chlorine, colour, odour and dissolved organics. Get this stage right and everything downstream lasts longer and runs cheaper; skimp on it and you will be replacing membranes every year.

How the process works
- 1
Feed pumping
Water is pressurised through the vessel from the top.
- 2
Graded media bed
Layers of gravel and sand trap suspended solids progressively.
- 3
Carbon adsorption
Activated carbon adsorbs chlorine, colour, odour and organics.
- 4
Backwash
Reverse flow lifts and scours the bed, flushing trapped solids to drain.
- 5
Rinse & return
Short forward rinse settles the bed before the unit returns to service.
Benefits
- Turbidity and suspended solids reduced below 5 ppm
- FRP vessels are light, corrosion-free and low maintenance
- Manual or fully automatic multiport valve operation
- Protects and extends the life of downstream membranes
